Big Ideas for Small-Scale Craft Brewing: Don’t Miss a Full-Day of 10 Live Online Seminars at the 2026 NanoCon. Register now and Save 25%!

recipe

Sweet Water Tavern’s Giddyup Stout clone

Sweet Water Tavern’s Giddyup Stout clone

(5 gallons/ 19 L extract with grain)
OG = 1.046  FG = 1.014 IBU = 28  SRM = 32  ABV = 4.3 %

Ingredients

3.3 lbs. (1.5 kg) Briess unhopped light liquid malt extract 1 lb. 10 oz. (0.73 kg) light dried malt extract 11 oz. (0.31kg) crystal malt (60 ºL) 6.0 oz. (0.17 kg) chocolate malt 6.0 oz. (0.17 kg) roast barley grain 3.0 oz.  (85 g) Carafa® malt 5.0 oz. (0.14 kg) dark roast coffee (medium grind) 2.5 oz. (71g) lactose powder 1/2 tsp. yeast nutrient (15 min) 7.5 AAU Galena hops (60 min.) (0.63 oz./18 g of 12.0% alpha acid) White Labs WLP023 (Burton Ale) or Wyeast 1275 (Thames Valley Ale) 0.75 cup (150 g) of corn sugar for priming (if bottling)

Step by Step

Steep the crushed grain in 3 gallons (11.4 L) of water at 154 ºF (68 ºC) for 30 minutes. Remove grains from the wort, add the liquid extract and bring to a boil. Add the only addition of Galena hops and boil for 60 minutes. During the boil, use this time to thoroughly sanitize a fermenter. Add the yeast nutrient after 45 minutes of boiling. Dissolve in the lactose at the end of the boil. Now add the wort to 2 gallons (7.6 L) of cold water in the sanitized fermenter and top off with cold water up to 5 gallons (19 L). Cool the wort to 75 ºF (24 ºC). Pitch your yeast and aerate the wort heavily. Allow the beer to cool to 68 ºF (20º C). Hold at that temperature until fermentation is complete. Transfer to a carboy, avoiding any splashing to prevent aerating the beer. Let the beer condition for 1 week. One day prior to bottling or kegging make a coffee extract by steeping the ground dark roast coffee in 24 oz. (0.7 L) of cold water and refrigerate. Strain out the coffee grounds, add your extract and then bottle or keg. Allow to carbonate for 2 weeks and enjoy your Giddyup Stout!

All-grain option: This is a single step infusion mash. Replace the malt syrup and dry malt extract with 8 lbs. (3.6 kg) 2-row pale malt. The other grains remain the same. Mix the crushed grain with 4 gallons (15.2 L) of 170 °F (77 °C) water to stabilize at 154 ºF (68 ºC) for 60 minutes. Sparge slowly with 175 ºF (79 ºC) water. Collect approximately 6 gallons (23 L) of wort runoff to boil for 60 minutes. The remainder of this recipe is the same as the extract-with-grain recipe.

You might also like…

recipe

Icicle Brewing Company’s Priebe Porter clone

The Priebe Porter is a classic representation of an American robust porter. The color is very dark brown but still displays nice clarity and

recipe

Sapwood Cellars’ Nu Zulund clone

recipe

Cairn 100% Brett IPA

There are many different ways to go with fermenting this recipe from Sacch Trois to Brett Trois or any favorite strain of yours. Either way,

recipe

Lagunitas Brewing Company’s New Dogtown Pale Ale Clone

This beer is pleasantly cosmopolitan, fusing European and American malts with American hops and English yeast to generate a firmly bitter an

Continue reading – Enter your email to log in or register

New to Brew Your Own? Create a free account to get our weekly newsletter and two free article webpage visits every month.

Yes! I would like to receive new content and updates.