Big Ideas for Small-Scale Craft Brewing: Don’t Miss a Full-Day of 10 Live Online Seminars at the 2026 NanoCon. Register now and Save 25%!

recipe

Triple Rock Brewery’s Dragon’s Milk Brown Ale clone

An English brown ale with enough hop bite to balance the malt backbone.

Dragon’s Milk Brown Ale clone recipe
Triple Rock Brewery, CA

(5 gallons/ 19 L, extract with grains)
OG = 1.068  FG = 1.016
IBUs = 55  SRM = 27  ABV = 6.8 %

Ingredients

6.6 lbs. (3 kg) Briess golden liquid malt extract
1.25 lbs. (0.57 kg) Briess extra light dried malt extract
1.5 lb. (0.68 kg) crystal malt (75 °L)
0.25 lb. (113 g) chocolate malt
0.25 lb. (113 g) roast barley (450 °L)
11.2 AAU Magnum pellet hops (60 min.) (0.8 oz./23 g of 14% alpha acid)
4.3 AAU Cascade pellet hops (30 min.) (0.75 oz./ 21 g of 5.75% alpha acid)
3.25 AAU Chinook pellet hops (0 min.) (0.25 oz./7 g of 13% alpha acid)
3.2 AAU Simcoe® pellet hops (0 min.) (0.25 oz./7 g of 12.8% alpha acid)
1⁄2 tsp. yeast nutrient (15 min.)
1⁄2 tsp. Irish moss (15 min.)
White Labs WLP001 (American Ale) or Wyeast 1056 (American Ale ) or Safale US-05 yeast
0.75 cup (150 g) corn sugar (for priming)

Step by Step

Steep the crushed grain in 1.5 gallons (5.7 L) of water at 150 ºF (65.5 ºC) for 30 minutes. Remove grains from the wort and rinse with 2 quarts (1.8 L) of hot water.

Add the liquid and dried malt extracts and bring to a boil. While boiling, add the hops, yeast nutrient and Irish moss as per the schedule. Now add the wort to 2 gallons (7.6 L) of cold water in the sanitized fermenter and top off with cold water up to 5 gallons (19 L).

Cool the wort to 75 ºF (24 ºC). Pitch your yeast and aerate the wort heavily. Allow the beer to cool to 65 ºF (18.3 ºC). Hold at that temperature until fermentation is complete.

Transfer to a carboy, avoiding any splashing to prevent aerating the beer. Allow the beer to condition for one week and then bottle or keg. Allow the beer to carbonate and age for two weeks.

All-grain option: This is a single step infusion mash using a total of 12.25 lbs. (5.6 kg) 2-row pale malt. Mix the crushed grains with 3.75 gallons (14 L) of 168 °F (75.5 °C) water to stabilize at 150 ºF (65.5 ºC) for 60 minutes. Sparge slowly with 175 ºF (79 °C) water. Collect approximately 6 gallons (23 L) of wort runoff to boil for 60 minutes. Reduce the 60 minute hop addition to 0.7 oz. (20 g) Magnum pellet hops to allow for the higher utilization factor of a full wort boil. The remainder of this recipe and procedures are the same as the extract with grain recipe.

You might also like…

recipe

Ninkasi Brewing Co.’s Vanilla Oatis Oatmeal Stout clone

Ninkasi describes Vanilla Oatis Oatmeal Stout as, “Characterized by a roasted front flavor, smooth rich oats, a touch of chocolate flavor,

recipe

Smoked “Imp” Imperial Stout

I like to make my imperial stouts on the dry/thin side so I mash low, but feel free to raise your mash temperature, or add some rolled oats

recipe

Southern Tier Brewing Co.’s Crème Brûlée clone

This inventive brew brings all the flavor of the classic hard-coated custard dessert into a creamy, dreamy beer.

recipe

New Holland Brewing Co. Dragon’s Milk clone

New Holland describes Dragon’s Milk as, “A stout with roasty malt character intermingled with deep vanilla tones, all dancing in an oak

Continue reading – Enter your email to log in or register

New to Brew Your Own? Create a free account to get our weekly newsletter and two free article webpage visits every month.

Yes! I would like to receive new content and updates.