Don’t miss our New England Beer & Baseball adventure in 2026! Click here to register!

recipe

German-Style Pilsener

3 different hop varieties add character to this crisp and bitter German-style Pilsener.

German-Style Pilsener, All-Grain

(5 gallons/19 L, all-grain)
OG = 1.055   FG = 1.012
IBU = 40   SRM = 4   ABV = 5.8%

Ingredients

10.2 lbs. (4.6 kg) continental Pilsner malt
1.1 lbs. (0.5 kg) Weyermann Carafoam® malt 
6 AAU Tettnang hops (80 min.) (1.5 oz./43 g at 4% alpha acids)
5.2 AAU Spalt hops (30 min.) (1.3 oz./37 g at 4% alpha acids)
2.6 AAU Hallertauer Mittelfrüh hops (5 min.) (0.6 oz./17 g at 4.25% alpha acids)
White Labs WLP830 (German Lager) or Wyeast 2124 (Bohemian Lager) yeast
2⁄3 cup corn sugar (if priming)

Step by Step

This is a multi-step infusion mash. Mash in at 122 °F (50 °C). Rest 30 minutes. Raise temperature to 144 °F (62 °C). Rest 20 minutes. Raise temperature to 162 °F (72 °C). Rest 20 minutes. Raise temperature to 172 °F (78 °C) for the mash-out. Transfer mash to lauter tun. Recirculate. Sparge to pre-boil gravity of about 1.042, assuming 1.5 gallons (5.7 L) evaporation during subsequent boil. Boil for 90 minutes. Bitter hop at 10 minutes into the boil; flavor hop at 60 minutes; aroma hop at 85 minutes. After the boil, verify OG in kettle. Add water if too much evaporation occurred.

Chill the wort down to the top of the selected yeast’s temperature range. Aerate the wort thoroughly. Maintain transfer temperature until primary fermentation is vigorous. Pull temperature down slowly to the bottom of the selected yeast’s tem-perature range. Rack at terminal gravity. Reduce temperature to about 34 °F (1 °C), or lower. Lager at least eight weeks (12 weeks is better). Prime the beer with a total of 4 oz. (112 g) of corn sugar. Technically, this is the equivalent of 2.5 volumes of CO2 (5 grams of CO2 per liter), measured at 50 °F (10 °C). Then package the brew.

German-Style Pilsener, Extract with Grains

(5 gallons/19 L, extract with grains)
OG = 1.055  FG = 1.012
IBU = 40   SRM = 4 ABV = 5.8%

Ingredients

7 lbs. (3.2 kg) Pilsen liquid malt extract
1.1 lbs. (0.5 kg) Weyermann Carafoam® malt
6 AAU Tettnang hops (80 min.) (1.5 oz./43 g at 4% alpha acids)
5.2 AAU Spalt hops (30 min.) (1.3 oz./37 g at 4% alpha acids)
2.6 AAU Hallertauer Mittelfrüh hops (5 min.) (0.6 oz./17 g at 4.25% alpha acids)
White Labs WLP830 (German Lager) or Wyeast 2124 (Bohemian Lager) yeast
2⁄3 cup corn sugar (if priming)

Step by Step

Crush and steep the optional Carafoam® in a nylon or muslin bag for about 30 minutes in approximately 2 qts. (~2 L) of water, at roughly 160 °F (70 °C). Raise and rinse the bag with 2 cups (~0.5 L) of cold water. Do not squeeze the bag. Dissolve about 7 lbs. (3.2 kg) of liquid malt extract in the steeping liquid plus enough water to bring the OG of the mix to approximately 1.042, assuming a 1.5 gallons (5.7 L) evaporation rate during a 90-minute boil. Bring to a boil and proceed as for the all-grain batch.

You might also like…

recipe

Terrapin Brewing Co.’s Rye Pale Ale clone

Dry hopped with Amarillo®, this American rye pale ale is perfect for summer enjoyment.

recipe

Pedal Haus Brewery’s Barrel-Aged Quad Clone

It’s a beer big in all regards: Aroma, flavor, mouthfeel, and alcohol. The beer has a full body, with enough carbonation (2.8 v/v) to give

recipe

Late-Hopped Simcoe Ale (Small Batch)

An American Pale Ale, this recipe is for the ultimate short brew day. From flame-on to cleanup is only 90 minutes. Lots of floral, fruity Si

recipe

Firestone Walker Brewing Co.’s Sucaba clone

This English-style barleywine from Firestone Walker (Paso Robles, California) is aged in recently emptied Bourbon barrels to pick up flavors