Plate Chillers

 

This is a good question in that there is not a single answer. The
company that puts bread on my table manufactures plate heat exchangers,
among many other things stainless, and we also use brazed plate heat
exchangers for certain purposes in some of the processing systems we
manufacture. In heat exchanger lingo a plate heat exchanger, often
referred to simply as a PHE, is made of plates where the cooling or
heating medium is on one side of the plate and the product is on the
opposite. In many applications it is desirable to be able to dissemble
the PHE for maintenance, inspection and/or cleaning. When this
functionality is required the units are bolted together and the plates
separated by gaskets.

Another type of PHE is the brazed plate heat exchanger. These are
typically used where disassembly is not required or the added cost
required to make the unit serviceable is not worth the money. Brazed
PHEs are normally used for simple utility duties where there is not
“clean” product involved. For example, if you want to heat water with
steam and use the hot water in a secondary heating application the
brazed PHE is a decent choice.

When our customers are heating or cooling a food product, a PHE designed
to be disassembled is the go-to heat exchanger. Typical examples
include wort cooling, beer cooling, wine attemperation, hot water
production using steam, solution heating in CIP (clean-in-place) systems
and flash pasteurization units.

Brazed plate heat exchangers are cheaper, however, the problem with the
brazed PHE is that you cannot disassemble the unit and this makes some
people uncomfortable. On the other hand, the brazed PHE has become quite
popular for homebrewers because they are available in small sizes and
they are priced to fit the homebrewing budget. While I would never sell
one of these units to a commercial brewer for wort cooling, I would
recommend them, with caution, to a homebrewer.

The biggest problem with PHEs in general is that solids can become
trapped within the plate pack. When wort coolers collect solids things
can be a problem because, as you state, microorganisms can (and do)
grow. When this occurs the wort cooler becomes a wort contaminator.

So what is a homebrewer to do? If you have the funds and really don’t
mind spending the extra money, a small PHE designed to be taken apart is
my first recommendation.

If you choose to purchase a brazed PHE I strongly advise putting some
sort of coarse filter in front of the unit to trap bits of hops and
trub. This can be something as simple as a section of stainless steel
scrubby pad on the inlet of your wort siphon or on the outlet of your
kettle if you have a valve.

After use I would clean the unit by thoroughly rinsing it with water and
then I would “pack” the unit with a 2–3% solution of sodium hydroxide
(commonly known as lye or caustic) or a less alkaline cleaner, such as
Powdered Brewery Wash (PBW). Allow the cleaner to sit in the PHE for at
least an hour before rinsing. This will help to remove protein soils
that form films on stainless steel surfaces. As with all cleaners it is
important to exercise caution at home.

Response by Ashton Lewis.